JMNC32A+P50+D32
Developed by a group of top engineers and technicians with rich on ground and theoretical experience in the field of EDM, JMNC32A+P50+D32 renders superb engineering supremacy and unmatched mechanical features to outstand others.
- Specs
- Accessories
- Features
- Controls
- Cut Samples
- Video
- Inquiry
MACHINE UNIT & DIELETRIC TANK UNIT
ITEM | UNIT | JMNC32A+P50+D32 |
---|---|---|
Work table size | mm | 600 × 300 |
X travel | mm | 300 |
Y travel | mm | 200 |
Z travel | mm | 300 |
Ram platen to work table | mm | 167 ~ 467 |
Max. electrode weight | kgs | 60 |
Max. workpiece weight | kgs | 500 |
Work tank ( W × D × H) | mm | 845 × 510 × 300 |
Weight of machine unit | kgs | 1150 |
Machine Outside dimensions ( W × D × H ) | mm | 1675 × 1200 × 2075 |
Max. Machining Current | A | 50 |
Total Power Input | KVA | 4.5 |
Max. Metal Removal Rate | mm3 / min | 390 |
Electrode Wear Ratio | % | 0.20 |
Best Surface Roughness | µm Ra | 0.20 |
Net Weight | kgs | 250 |
Outside Dimensions ( W × D × H ) | mm | 680 × 1070 × 1820 |
Dielectric tank capacity | L | 280 |
Dielectric tank pump | HP | 0.5 HP × 1 |
Dielectric tank net weight kgs | built-in | |
Dielectric tank filter method | Paper filter | |
Dielectric tank outside dimensions ( W × D × H ) | mm | built-in |
* All specification and design are subject to change without notices.
STANDARD ACCESSORIES
Paper filters 1 set |
Tool box 1 pc |
Flushing nozzle 1 set |
Drill chuck 1 pc |
Clamping kit 1 set |
Electrode holder 1 pc |
Halogen machine work lamp 1 pc |
Leveling pads 1 set |
OPTIONAL ACCESSORIES
Auto fire extinguisher |
Permanent magnetic table |
Dielectric cooler |
Auto Electrode Changer ( For CNC EDM only ) |
3 or 4 Tools |
C-axis ( For CNC EDM only ) |
Spare PCB set |
THE MAIN FEATURES OF THE CNC POWER SUPPLY
486 PC Based industrial grade computer to enchance processing time & highest reliability. |
Built-in 8 sets of most optimized machining datas ( Cu-St, Cu-Al, Gr-St, Gr-Al , St-St, Cu-WC, CuW-Wc & others ) for machining different materials from rough to fine surface finishing which each set included 32 steps machining choices. |
Most advanced “ L.W.F. ” sparking circuits to decerase the electrode wear, especially at the sharp corners. |
Special " TRACKING MODE " Off Time Control circuits to prevent arcing. |
X Y Z 3 axes moves simultaneously to machining high precise, sophisiticated moulds. |
Dialogue programming and easy to operate. |
Using ‘ MOSFET ’ sparking circuits to enhance performance and get the big areas of mirror finish easily. |
The whole CNC power supply unit is designed with module boxes to keep simple maintenance & service. |
Dual voltage ( high / low voltage ) currents being synchronously discharged allows faster metal removal rate and uniform surface finish. |
MM / INCH selectable. |
All machining parameters can be modified at any time during sparking and without affecting the stored memory. |
Complete and powerful CNC functions: Z axis vertical machining, multi holes machining, side machining, orbiting machining, 3 axes contour machining, auto edge finding, auto circle center finding. |
Auto electrode changers, C axis & A axis are available to enhance the fully automated machining, non-stop, top-performance production. |
EXCEPTIONAL PERFORMANCE
JOEMARS EDM utilizes state-of-the-art circuits for the power supply. All electronics are transistorized, using MOSFET for enhanced performance. Dual voltage current being synchronously discharged allows fast metal removal rate and uniform surface finish. “No wear” operations with both copper and graphite are strong features of JOEMARS EDM. A special micro finish circuit for very fine surface finish capabilities is another standard feature. |
EASY MAINTENANCE
All PC boards are sectioned in modular box design. Terminal blocks are employed for wire connections between modules. LED lights are used to indicate the status of the fuses and modules. Maintenance cost on the power supply is thus reduced to a minimum. |
GREAT RELIABILITY
Low temperature electronics are separated from high heat components for better heat ventilation. |
An independent heat elimination system is also provided to ensure reliable performance from the power supply. |
CUSTOMER SERVICE
JOEMARS EDM is committed to providing customer service, including operator training, maintenance service and application evaluation. Our engineering staff are available to design fixtures for your special EDM applications. |
CONTROLS
3D graphic display |
CONTROLS 2
Built-in running & orbiting modes for quick & easy programs editing. |
CONTROLS 3
Built-in 256 sets of machining data for different materials machining from rough to fine surface finishing. |