JMNC60+P100+D60

Developed by a group of top engineers and technicians with rich on ground and theoretical experience in the field of EDM, JMNC60+P100+D60 renders superb engineering supremacy and unmatched mechanical features to outstand others.

  • Specs
  • Accessories
  • Features
  • Controls
  • Cut Samples
  • Video
  • Inquiry
MACHINE UNIT & DIELETRIC TANK UNIT
ITEM UNIT JMNC60+P100+D60
Work table size mm 900 × 650
X travel mm 600
Y travel mm 400
Z travel mm 350
Ram platen to work table mm 255 ~ 605
Max. electrode weight kgs 150
Max. workpiece weight kgs 2000
Work tank ( W × D × H) mm 1300 × 900 × 430
Weight of machine unit kgs 3000
Machine Outside dimensions ( W × D × H ) mm 1870 × 2495 × 2320
Max. Machining Current A 100
Total Power Input KVA 9
Max. Metal Removal Rate mm3 / min 770
Electrode Wear Ratio % 0.20
Best Surface Roughness µm Ra 0.20
Net Weight kgs 330
Outside Dimensions ( W × D × H ) mm 680 × 1070 × 1820
Dielectric tank capacity L 800
Dielectric tank pump HP 0.85 HP × 2
Dielectric tank net weight kgs 200
Dielectric tank filter method Paper filter
Dielectric tank outside dimensions ( W × D × H ) mm 1200 × 2000 × 1100

* All specification and design are subject to change without notices.
STANDARD ACCESSORIES
Paper filters 1 set
Tool box 1 pc
Flushing nozzle 1 set
Drill chuck 1 pc
Clamping kit 1 set
Electrode holder 1 pc
Halogen machine work lamp 1 pc
Leveling pads 1 set
OPTIONAL ACCESSORIES
Auto fire extinguisher
Permanent magnetic table
Dielectric cooler
Auto Electrode Changer ( For CNC EDM only )
3 or 4 Tools
C-axis ( For CNC EDM only )
Spare PCB set
THE MAIN FEATURES OF THE CNC POWER SUPPLY
486 PC Based industrial grade computer to enchance processing time & highest reliability.
Built-in 8 sets of most optimized machining datas ( Cu-St, Cu-Al, Gr-St, Gr-Al , St-St, Cu-WC, CuW-Wc & others ) for machining different materials from rough to fine surface finishing which each set included 32 steps machining choices.
Most advanced “ L.W.F. ” sparking circuits to decerase the electrode wear, especially at the sharp corners.
Special " TRACKING MODE " Off Time Control circuits to prevent arcing.
X Y Z 3 axes moves simultaneously to machining high precise, sophisiticated moulds.
Dialogue programming and easy to operate.
Using ‘ MOSFET ’ sparking circuits to enhance performance and get the big areas of mirror finish easily.
The whole CNC power supply unit is designed with module boxes to keep simple maintenance & service.
Dual voltage ( high / low voltage ) currents being synchronously discharged allows faster metal removal rate and uniform surface finish.
MM / INCH selectable.
All machining parameters can be modified at any time during sparking and without affecting the stored memory.
Complete and powerful CNC functions: Z axis vertical machining, multi holes machining, side machining, orbiting machining, 3 axes contour machining, auto edge finding, auto circle center finding.
Auto electrode changers, C axis & A axis are available to enhance the fully automated machining, non-stop, top-performance production.
EXCEPTIONAL PERFORMANCE
JOEMARS EDM utilizes state-of-the-art circuits for the power supply. All electronics are transistorized, using MOSFET for enhanced performance. Dual voltage current being synchronously discharged allows fast metal removal rate and uniform surface finish. “No wear” operations with both copper and graphite are strong features of JOEMARS EDM. A special micro finish circuit for very fine surface finish capabilities is another standard feature.
EASY MAINTENANCE
All PC boards are sectioned in modular box design. Terminal blocks are employed for wire connections between modules. LED lights are used to indicate the status of the fuses and modules. Maintenance cost on the power supply is thus reduced to a minimum.
GREAT RELIABILITY
Low temperature electronics are separated from high heat components for better heat ventilation.
An independent heat elimination system is also provided to ensure reliable performance from the power supply.
CUSTOMER SERVICE
JOEMARS EDM is committed to providing customer service, including operator training, maintenance service and application evaluation. Our engineering staff are available to design fixtures for your special EDM applications.
CONTROLS
3D graphic display
CONTROLS 2
Built-in running & orbiting modes for quick & easy programs editing.
CONTROLS 3
Built-in 256 sets of machining data for different materials machining from rough to fine surface finishing.
Company
Type
Email
Contact
Country
Tel
Fax
Your enquires please